The PRECISION KIDD STEEL facility in Aliquippa serves as our general office/headquarters, and as a manufacturing center for wire products (wire mill).

Click here for Google Map directions from your address to our Aliquippa Plant, or follow the relevant directions provided below:

From Downtown Pittsburgh or Pittsburgh International Airport:

Take Route 60 North to the Hopewell exit, Exit 9. From exit, proceed on Route 151 East. Continue on 151 East until it intersects Route 51. Make a left turn onto Route 51 North. Proceed on 51 North past the Ambridge-Aliquippa bridge and past the Aliquippa exit. After passing the Aliquippa exit, proceed to the West Aliquippa exit (left exit). Take the exit ramp to the stop sign and turn right onto the railroad overpass bridge.

At the end of the bridge, turn left, proceed for approximately 100 yards, and then make the next left. To go to our material receiving or shipping docks, bear right into our warehouse area. To go to our office, make the next left onto Main Street, proceed one block and turn right at 2nd Street — Precision Kidd’s parking lot will be straight ahead.

From Points North or East:

Take I-79 South or the PA Turnpike (I-76) west-bound to Exit 3 (Perry Highway and I-79), as the case may be. Proceed on I-79 South to the Sewickley exit. From the exit ramp, follow the signs to Route 65 North. Proceed on 65 North to the 3rd light, turn left onto the Sewickley Bridge. At the end of the bridge, turn right onto Route 51 North. Follow Route 51 North as it bears right uphill about 1/2 mile after the bridge and continues downhill toward a “T” intersection. Turn right at the “T” and continue on 51 North. Proceed approximately 5 miles, past the Ambridge-Aliquippa bridge, and past the Aliquippa exit. Take the exit ramp to the stop sign, turn right onto the railroad overpass bridge and follow the italicized directions above.

From Points South:

Take I-79 North from Washington, PA and take Exit 59B to Routes 22/30 West and toward the Pittsburgh International Airport. Proceed on Route 22/30 West (this is known as the “Parkway West”). After approximately 3 miles, the Parkway West route number will change to Route 60 North. Proceed on Route 60 North to the Hopewell exit, Exit 9. From exit, proceed on Route 151 East. Continue on 151 East until it intersects Route 51. Make a left turn onto Route 51 North. Proceed on 51 North past the Ambridge-Aliquippa bridge and past the Aliquippa exit. Proceed to the West Aliquippa exit (left exit). Take the exit ramp to the stop sign and turn right onto the railroad overpass bridge and follow the italicized directions above.

From Points West:

From the Ohio Turnpike, continue onto the PA Turnpike (I-76) east bound and proceed to Exit 1-A. Take Exit 1-A to Route 60 South. Proceed on Route 60 South to the Hopewell exit, Exit 9. From the exit, proceed on Route 151 East. Continue on 151 East until it intersects Route 51. Make a left turn onto Route 51 North. Proceed on 51 North past the Ambridge-Aliquippa bridge and past the Aliquippa exit. Proceed to the West Aliquippa exit (left exit). Take the exit ramp to the stop sign and turn right onto the railroad overpass bridge and follow the italicized directions above.

The PRECISION KIDD STEEL facility in Clinton, Pennsylvania serves primarily as a bar mill, with multiple draw benches. We also perform die design and tooling manufacturing services, as well as centerless grinding services at this location. Our new 60 ton draw bench increases our bar size range and improves our ability to continue to provide you the best service in the industry:

• Bars: Maximum 3″ (76mm) square
• Rectangles and Special Shapes: Maximum 5″ (127mm) width and up to 9 square inches (58 sq. cm) in cross section
• Rounds and Hexagons: Maximum 3″ (76mm) diameter

Click here for Google Map directions from your address to our Clinton Plant, or follow the relevant directions provided below:

From Downtown Pittsburgh or Pittsburgh International Airport:

Take Route 60 North, past the Pittsburgh International Airport, and take the Clinton (Route 30) exit. From the exit ramp, turn left onto Moon Clinton Road and follow the signs to Route 30.

Turn right onto Route 30 West. Proceed approximately 150 yards and make the first right onto Matchette Road. Proceed approximately 100 yards and turn right into the access road to Precision Kidd’s plant. Our material receiving dock is directly ahead. To go to our shipping dock, proceed around the left side of the plant building; the shipping dock is at the rear.

From Points North or East:

Take I-79 South or take the PA Turnpike (I-76) west-bound to I-79, as the case may be. Proceed on I-79 South to Route 60 North. Follow Route 60 North (past the Airport) and take the Clinton (Route 30) exit. From the exit ramp, turn left onto Moon Clinton Road, follow the signs to Route 30 and follow the italicized directions above.

From Points South:

Take I-79 North from Washington, PA and take Exit 59B to Routes 22/30 West and toward the Pittsburgh International Airport. Proceed on Route 22/30 West (this is known as the “Parkway West”). After approximately 3 miles, the Parkway West route number will change to Route 60 North. Proceed on Route 60 North (past the Airport) and take the Clinton (Route 30) exit. From the exit ramp, turn left onto Moon Clinton Road, follow the signs to Route 30, and follow the italicized directions above.

From Points West:

From the Ohio Turnpike (I-80) or (I-76), continue onto the PA Turnpike (I-76) east-bound and proceed to Exit 1-A. Take Exit 1-A to Route 60 South. Proceed on Route 60 South to the Clinton Exit #7. Turn right onto Moon Clinton road (following the signs to Clinton and Route 30) and follow the italicized directions above.